Centurion Fire & Rescue Equipment is a fully Australian owned manufacturer of Emergency Vehicle Roller Shutters, Locker Lighting, Fire/Rescue Ladders & supplier of PAC Equipment Stowage Brackets

Centurion Fire & Rescue Equipment

THE COMPLETE ANSWER FOR VEHICLE ROLLER SHUTTERS, EQUIPMENT STOWAGE, FIRE RESCUE LADDERS & HIGH ROOF ACCESS EQUIPMENT

ORDER NOW - CALL:

02 4955 3780

ARION9DXW-RO

Categories for this Product: Ladders > Double Extension Ladders
 ARION9DXW-RO
Price: $poa
 
Enquire about ARION9DXW-RO
  * - Required Fields
 
Your name: *
Email address: *
Phone number: *
Postcode: *
Your enquiry:

The ARION9DXW-RO is a 9 metre (wide) Aluminium Double Extension Fire/Rescue Ladder
comprising of two ladder sections operated by a single rope hauling line. The ladder is tested & certified to BS-EN1147, Ladders for Fire Service Use as a 3-Person Fire/Rescue Ladder. This ladder is the ‘wide’ option of our 9 metre ladder range.

Pawling of the ladder is achieved with ‘fully automatic pawls’, both of which are located on
each side of the ladder top section near the base of the ladder. These pawls interact audibly
with each rung to enable rung counting to assist with ladder extension height in low light
conditions. They are simply actuated by allowing the pawls to pass the rung of choice, bring
them back down past the rung & then up to have them click into place. The Automatic Pawls
allow for maximum foot area, (no additional pawl axle) & negate the need for double rope
pawling. The ladder rungs are fully ribbed for maximum boot grip.

The ladder is equipped with a rope safety device or ‘Automatic Arrest Device’, (AAD). This
sprung cam arrangement is located on the top of the base section where the rope passes
through the top pulley. In the case of a sudden unintentional rope release while deploying or
stowing the ladder, the sprung cam interacts with the rope locking it into place.
The top or ‘fly’ section of the ladder extends from the front of the ladder & all rope work is
carried out from the back of the ladder. The ladder is equipped with solid rubber feet with
swivel feet available.

The top section of the ladder is equipped with a ‘Sprung Stop’ on the right hand side of the
bottom rung. The ladder sections can be split apart by detaching the hauling line, pulling the
top section out until it interacts with the top stop bracket & then by depressing the sprung stop moving it past both top stop brackets allowing the ladder section to be fully split apart.


SPECIFICATION

Stowed Length - 5.48 metres
Open Length - 9 metres
Overall Width - 480mm
Overall Depth of Stiles - 172mm (add 13mm for AAD at top end)
Weight - 41 kg